Types of imblance
There are two types of imbalance caused by heavy or light spots:

Static imblance
Static imbalance occurs when there is a heavy or light spot in the tire, causing it to roll unevenly in an up-and-down movement.

Dynamic imbalance
Dynamic imbalance occurs when there is unequal weight on both sides of the tire/wheel assembly centerline, causing a side-to-side movement.

Run-Out
Excessive run-out, or an out of round tire and wheel assembly is often caused by improper bead seating on the rim. It may also be caused by not match-mounting the tire and wheel assembly. A small amount of non-uniformity may not cause a vibration, a larger amount will cause vibration and irregular tire wear.
Radial Run-Out
An out-of-round situation where vibrations are produced as the wheel spindle moves up and down.
Lateral Run-Out
A less-common, side-to-side or wobbling movement of the tire and wheel. Sensitivity of a vehicle to vibration from radial run-out is four to eight times that of wobble caused from lateral run-out.
Sources of Imbalance
Sources of imbalance can be traced to heavy or light spots in the tire, radial and lateral run-out variations within the wheel (such as thickness and welds), and rotor and axle imbalances.
Correcting non-uniformity
Correcting Imbalance
Heavy or light spot balancing is corrected either statically or dynamically, depending on the type of imbalance.
- Static Balance is achieved with a static "bubble" balancer but does not correct for dynamic imbalance.
- Dynamic Balance is achieved with a dynamic "spin" balancer where the tire/wheel assembly is balanced both statically and dynamically.
Correcting run-out
Excessive run-out is frequently caused by damaged or poorly manufactured wheels Using a runout gauge, confirm the quality of the wheel by measuring the radial and lateral runout of the run flange. If the wheel does not exhibit excessive runout:
- Address radial runout by dismounting the tire, re-lubricating the tire and wheel, rotating the tire 180 degrees on the wheel, and re-inflating.
- Address lateral runout by dismounting the tire, re-lubricating the tire and wheel and re-inflating

